All board projects
Quality open-source board projects and technical materials from CrowdSupply, Hackaday, and Hackster.io, all in one place
Adding new ML model in VVAS & running it on KV260
This tutorial detail the steps for adding new ML model either from Vitis AI model zoo or custom model in VVAS and running it on KV260 board.
TE0711 SoM - Booting from External Flash
This project walks through how to configure the TE0711 SoM to boot from its QSPI external flash memory using the TE0701 baseboard.
OmniSTARK
A fun, seriously intelligent, omni-directional, self-driving robot.
COVID-19 Detection from X-Ray Using OpenVino
Detecting COVID-19 with 90% Accuracy using X-Ray Scans and Speeding Up the process with OpenVino
Smart Home using ARTIK Cloud
Control and monitor home appliances through ARTIK Cloud and mobile app using Intel Edison as the base connection for devices and sensors.
Simple SOC using Cortex-M0
This project aims to design a simple SOC using the ARM Cortex - M0 design start eval IP.
Empowering DUNE: AXI IIC using Petalinux 2022.2 in KRIA
In this tutorial, we provide the steps to create the hardware design to support the AXI IIC IP and interact with I2C using Petalinux
Edge Impulse's Ingestion Service on Embedded Linux Part 1
See how to install Edge Impulse's C SDK in an embedded Linux image to use their ingestion service for sending data to and from EI Studio.
Colorizing Sequential Content : ColorNet
Novel method for colorizing sequential content
ZUBoard - Adding support for ROS2
This project describes how to add support for ROS2 to the ZUBoard.
Tria Vitis Platforms - Adding support for Hailo-8
This project describes how to add support for Hailo-8 to the Tria Vitis Platforms.
0 to 999 counter on Xilinx Spartan 6 FPGA
0 to 999 (3 digit) counter is implemented on 3 single digit 7 segment display (Common anode type) with FPGA on hardware.
Credits to authors and platforms
All projects aggregated here come from the open-source platforms listed above, and copyright remains with the original authors. We respect the work of every open-source contributor, and all content follows its original open-source license. If you are a project author and would like the related content removed, please contact us.