Quick answer
IoT collects 83 projects on ZouIC. The sources include Hackster.io, ZouIC Boards, GitHub, Hackaday.io, Seeed Studio.
- Entries
- 83
- Sources
- Hackster.io, ZouIC Boards, GitHub, Hackaday.io, Seeed Studio, CrowdSupply
Common questions
How many projects does ZouIC list under IoT?
83, each with its own detail page and a link to the original source.
Where do the IoT entries come from?
Aggregated from Hackster.io, ZouIC Boards, GitHub, Hackaday.io, Seeed Studio, CrowdSupply.
Orange Pi Zero 2W
A quad-core Allwinner H618 board with 1-4 GB RAM, onboard Wi-Fi 5/Bluetooth 5.0 and a 30x65 mm footprint for low-power IoT nodes and portable display projects.
Orange Pi Zero 3
A quad-core Allwinner H618 A53 board with 1-4 GB RAM, 4K HDMI and 26/13-pin expansion for entry-level Linux, media playback and IoT gateways.
Orange Pi Zero 3W
A compact eight-core Allwinner A733 board with a 3 TOPS NPU, optional eMMC/UFS and a 40-pin header for compact AIoT devices, machine vision and dual-screen terminals.
Orange Pi Zero 4
A compact eight-core Allwinner A733 board with a 3 TOPS NPU, up to 16 GB RAM, Gigabit Ethernet and Wi-Fi 6 for space-constrained edge AI and display terminals.
Wio Terminal
An ATSAMD51 handheld with a 2.4-inch LCD, five-way switch, microphone, buzzer and two Grove ports for teaching and field tools.
XIAO ESP32-C3
A single-core 160 MHz RISC-V board with Wi-Fi and BLE 5.0, 11 GPIO and a low entry price for connected projects.
XIAO ESP32-C6
ESP32-C6 with Wi-Fi 6, BLE 5.0, Zigbee and Thread support, including Matter, for smart-home and low-power nodes.
XIAO ESP32-S3
Dual Xtensa LX7 cores at 240 MHz with 8 MB flash, 8 MB PSRAM and 11 GPIO for connected and light vision workloads.
XIAO MG24 Sense
The MG24 sensing variant with a six-axis IMU and analog microphone for Matter sensors and TinyML starters.
XIAO nRF52840
Cortex-M4F at 64 MHz with 1 MB flash, BLE 5.4, NFC and USB-C for low-power Bluetooth and battery devices.
XIAO nRF52840 Sense
The sensing variant of the nRF52840 XIAO with a six-axis IMU and PDM microphone for motion and audio projects.
XIAO RA4M1
Renesas RA4M1 Cortex-M4 at 48 MHz with 19 GPIO, CAN, a 14-bit ADC and 12-bit DAC, compatible with the Arduino Uno R4 ecosystem.
XIAO RP2040
The dual Cortex-M0+ XIAO with 2 MB flash and 264 KB SRAM, supporting Arduino, MicroPython and CircuitPython.
XIAO RP2350
Dual Cortex-M33 RP2350 at 150 MHz with 19 GPIO, an RGB LED and battery management for compact low-power control projects.
XIAO SAMD21
A 21x17.8 mm SAMD21 board with 14 GPIO and one DAC, aimed at Arduino beginners, sensor nodes and small wearables.
Windows 10 IoT Core: Setting Startup App
Set the specific app as startup application when your Windows 10 IoT Core boots.
Lead Acid Battery Capacity Tester (Updated)
A 12 V Lead-Acid Battery is Discharged at a Constant Current (Programmable) for a Period of Time to get Terminal Voltage VS Time curve
“It’s For The Birds!”
An Arduino 101 lets us Reinvent the Future of Eco-monitoring! Come and Seeed how the Grove IoT kit makes it better!
IoT@School: An IoT Implementation for Monitoring Air Quality
A classroom, in winter times is ill ventilated leading to poor air quality causing fatigue, headaches and in some instances nausea.
Zybo Autonomous Car
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
HoloCubic
A pseudo-holographic transparent desktop display with network connectivity, designed and open-sourced by GeekWaedon. A transparent LCD panel plus a custom optical structure creates a floating effect, and Wi-Fi lets you refresh content remotely. Often used for desktop ambience and information display. GPL-3.0 licensed.
//build 2014 - Piano
The original hack from the Windows IoT Maker Team, which debuted at the 2014 //build conference.
Let's make a smartwatch with AWS IoT
Intel Edison is small enough to use as a wearable, so why not we make a smart watch with Edison and powerful AWS IoT.
XIAO ESP32S3
The flagship model in Seeed Studio's thumb-sized XIAO development board series. ESP32-S3 dual-core at 240 MHz, 8 MB PSRAM + 8 MB Flash, Wi-Fi + BLE 5.0, USB-C power. Full Arduino / MicroPython support, measuring just 21 × 17.8 mm.
Custom Webserver on the MiniZed
Take advantage of the MiniZed's built-in Wi-Fi with a custom webserver written in Python.
Interacting with a TI SensorTag from an Intel NUC
This project shows you how setup an Intel NUC to interact with a TI SensorTag device using BLE (Bluetooth Low Energy).
Intel Edison IoT Hydroponic Controller
An IoT enabled Hydroponics Controller using the Intel Edison during the Boston IoT Hackathon
Intel Galileo Wireless Network Setup – WiFi
Setup WiFi on Intel Galileo usign intel Wi-Fi Link 5100 and external antenna.
Intel Edison WiFi Scanner
Want to know what WiFi access points are around you? Take a look at this!
_ossPYOnmcT.jpg?auto=compress%2Cformat)
DIY Remote WiFi Switch Using the RAK DashButton
This project shows how to use the RAK DashButton to create a safe, Wifi based switch to control your electrical appliances.
Make me coffee when I get to the office
Detect when I connect to my office's WiFi network and then make coffee for me
Intel Edison and Intel XDK IoT Edition 101
This is a guide for getting started with Intel Edison and Intel XDK IoT Edition.
AWS Panoptes
An IoT Thing using the Amazon cloud that monitors and reports observed radio frequency spectral power and can be remotely controlled.
Preamble Synchronization
Preamble is a signal used in network communications to synchronize transmission timing between two or more systems.
Leukemia Detection on Arduino Nano 33 BLE Sense
An experiment to explore how Arduino Nano 33 BLE Sense, can be used to detect Acute Lymphoblastic Leukemia.
BitCoinSensor - Intel Edison
An IoT solution for monitoring the price of Bitcoin with Visual and Auditory cues pertaining to the volatility of the the CoinDesk exchange
Air Quality Monitor
This is a project addendum to a larger project called "Scalable Intelligent Air Quality Monitoring and Response"
Banana Pi BPI-M2+ (M2 plus) Quad Core Single-Board Computer
Banana PI BPI-M2+ is an quad core version of Banana Pi.It support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm
Let's Make a Smartwatch
Intel Edison is small enough to use as a wearable, so why not we make a smart watch with Edison.
PyTLDR
PyTLDR is a private, personal assistant capable of indexing your text data and reading it back to you, no training or fine tuning required.
Smart Agriculture Bot Using IOT
An IOT based solution which automates the process of farming, making scalable urbanized farms come true
Mark Pro-52 (Smart AGV)
An automated guided vehicle is a must for any industry. Her we present the Smart Automated Guided Vehicle which is based on Industrial IoT.
HeartSpace Circadian Muse
Wearable that combines bio and environment data empowering everyone to enhance their creativity and well-being.
Smart Sensor IoT Bring Up on Two Continents
The Smart Sensor IoT Board is deployed in two continents can we bring them both up remotely.
Total projects 83 · 1 / 2
Related Categories
The entries on this page are all from public pages of various platforms. ZouIC only categorizes, indexes, and abstracts, and does not host code and files; The project is for developers' reference only, and the copyright and authorization belong to the original author, following their respective open source agreements.